What can we do for you?

Our offer includes chip tuning services for any popular brand of trucks. Reducing combustion and adapting to greener driving are our main services. We also offer a wide range of professional services for programming the functions of your vehicle. The most popular jobs we perform are:

REDUCTION IN COMBUSTION

It is a form of modification aimed at reducing a vehicle’s fuel consumption. The process involves fine-tuning a variety of engine operating parameters, such as fuel-air mixture, boost pressure, fuel injection timing, etc. The goal is to achieve optimum fuel efficiency, which translates into the truck’s ability to travel greater distances on a single tank of fuel.

EXCLUSION OF SPEED LIMITS

In the event of a malfunction related to the AdBlue or DPF system, the emission system, the software stored in the engine controller first limits power, and then, after a manufacturer-specified time and kilometers traveled, reduces the maximum speed to 20 km/h. In such a situation, it is impossible to reach the workshop for immediate repair of the defect. Our power and speed limit deactivation service prevents such a situation from arising by maintaining a higher speed, allowing the driver to return from the route and repair the vehicle at the chosen service center. Our technological solutions are distinguished by their lack of adverse impact on the ecology, maintaining compliance with emission standards. Disabling speed limits does not adversely affect the efficiency of the truck’s emission system, maintaining its effectiveness even in the event of a malfunction that displays an error on the dashboard.

EXCLUSION OF TORQUE LIMITS

As with torque limit disabling, when an emission system-related fault occurs, the software stored in the engine controller limits power. The torque limit disabling service also includes reprogramming the controller to eliminate the generation of errors related to the exhaust aftertreatment system.As with disabling speed limits, disabling power limits does not adversely affect the efficiency of the truck’s emission system, maintaining its effectiveness even when a malfunction occurs that results in an error display on the dashboard. This service is often much more cost-effective compared to repairing a faulty system.

OPTIMIZATION OF ADBLUE CONSUMPTION

Due to optimized fuel consumption, the vehicle will not need such a high dose of AdBlue due to which it will be optimized and adapted to current needs. The service includes calibration of the operating parameters of the SCR system according to the specifications of the vehicle in question, taking into account operating conditions, vehicle model and route characteristics.The main objective of the service provided is to ensure optimal efficiency in reducing nitrogen oxide (NOx) emissions by optimizing AdBlue consumption. The process involves fine-tuning key parameters such as the duration of AdBlue injection, the amount of injected substance and other relevant factors to optimize SCR system performance. The result of this process is an effective reduction in NOx emissions.Our technological solutions are distinguished by their effectiveness in maintaining exhaust emission standards, which not only contributes to environmental protection, but also guarantees compliance with applicable laws

INCREASE IN POWER AND TORQUE

The modifications are aimed at increasing the engine’s efficiency and optimizing its performance. The increase in power means that the vehicle is able to generate more energy, which translates into greater efficiency in transporting cargo. Improved performance enables the vehicle to move more efficiently with full or heavy loads, which affects stability and confidence when driving.An increase in power goes hand in hand with an increase in torque. Torque measures the force turning the engine’s crankshaft. Improved torque increases driving force, which improves engine flexibility, especially in the lower RPM ranges. This is particularly beneficial when tackling uphill climbs, difficult terrain and when transporting heavy loads. It is worth mentioning that the increase in power and torque can favorably reduce fuel consumption, and under certain conditions can positively affect the on the durability of the engine.

It is a form of modification aimed at reducing a vehicle’s fuel consumption. The process involves fine-tuning a variety of engine operating parameters, such as fuel-air mixture, boost pressure, fuel injection timing, etc. The goal is to achieve optimum fuel efficiency, which translates into the truck’s ability to travel greater distances on a single tank of fuel.

In the event of a malfunction related to the AdBlue or DPF system, the emission system, the software stored in the engine controller first limits power, and then, after a manufacturer-specified time and kilometers traveled, reduces the maximum speed to 20 km/h. In such a situation, it is impossible to reach the workshop for immediate repair of the defect. Our power and speed limit deactivation service prevents such a situation from arising by maintaining a higher speed, allowing the driver to return from the route and repair the vehicle at the chosen service center. Our technological solutions are distinguished by their lack of adverse impact on the ecology, maintaining compliance with emission standards. Disabling speed limits does not adversely affect the efficiency of the truck’s emission system, maintaining its effectiveness even in the event of a malfunction that displays an error on the dashboard.

As with torque limit disabling, when an emission system-related fault occurs, the software stored in the engine controller limits power. The torque limit disabling service also includes reprogramming the controller to eliminate the generation of errors related to the exhaust aftertreatment system.As with disabling speed limits, disabling power limits does not adversely affect the efficiency of the truck’s emission system, maintaining its effectiveness even when a malfunction occurs that results in an error display on the dashboard. This service is often much more cost-effective compared to repairing a faulty system.

Due to optimized fuel consumption, the vehicle will not need such a high dose of AdBlue due to which it will be optimized and adapted to current needs. The service includes calibration of the operating parameters of the SCR system according to the specifications of the vehicle in question, taking into account operating conditions, vehicle model and route characteristics.The main objective of the service provided is to ensure optimal efficiency in reducing nitrogen oxide (NOx) emissions by optimizing AdBlue consumption. The process involves fine-tuning key parameters such as the duration of AdBlue injection, the amount of injected substance and other relevant factors to optimize SCR system performance. The result of this process is an effective reduction in NOx emissions.Our technological solutions are distinguished by their effectiveness in maintaining exhaust emission standards, which not only contributes to environmental protection, but also guarantees compliance with applicable laws

The modifications are aimed at increasing the engine’s efficiency and optimizing its performance. The increase in power means that the vehicle is able to generate more energy, which translates into greater efficiency in transporting cargo. Improved performance enables the vehicle to move more efficiently with full or heavy loads, which affects stability and confidence when driving.An increase in power goes hand in hand with an increase in torque. Torque measures the force turning the engine’s crankshaft. Improved torque increases driving force, which improves engine flexibility, especially in the lower RPM ranges. This is particularly beneficial when tackling uphill climbs, difficult terrain and when transporting heavy loads. It is worth mentioning that the increase in power and torque can favorably reduce fuel consumption, and under certain conditions can positively affect the on the durability of the engine.

The benefits of our services

The benefits of our services

What is the process of performing the service?

INDIVIDUAL
CONSULTATIONS


• We conduct a consultation with the client. This allows us to identify and understand the real needs and expectations

• This allows us to recognize the current condition of vehicles, their operating specifications and service history.

• This allows us to obtain the necessary vehicle performance data, which is crucial when preparing documentation for any vehicle, especially in the context of the warranty period.

primary
diagnostics


• Before starting modifications, it is necessary
to carry out a detailed diagnostic of the carto assess its technical condition.

• Carefully check the condition of the engine,transmission and other key components

• Our service can only be performed if the vehicle is fully operational.

ENGINE CONTROLLER SOFTWARE READING


• We use specialized service tools, tailored to
the specific engine controller. This guaranteesfull compatibility and accuracy of readings.

• This process is done in a controlled manner,
ensuring the integrity of the data and enabling a secure comparative analysis betweenthe original and modified software.

SOFTWARE
MODIFICATION

• Our programmers make precise changes to the engine parameter maps according to the requirements of the commissioned service

• The goal is to optimize these parameters to achieve fuel savings of min. 1.5 l/100km and to increase engine torque and power

ROAD TESTS


• After modification, road tests are needed to check the car’s behavior.

• It is important to monitor engine performance and response to various traffic situations.

OPTIMIZATION AND ADJUSTMENT


• Based on the results of the road tests, we
can make a one-time final optimizationof the software.

• The goal is to achieve an optimal balancebetween engine performance and safety.

DOCUMENTATION AND GUARANTEE


• It is important to maintain detailed documentation of all changes made to the software, which allows you to monitor eachstage of the process.

• We provide a 6-month warranty for our
services. It provides additional security andassurance in our services.

  • We conduct a consultation with the client. This allows us to identify and understand the real needs and expectations.
  • This allows us to recognize the current condition of vehicles, their operating specifications and service history.
  • This allows us to obtain the necessary vehicle performance data, which is crucial when preparing documentation for any vehicle, especially in the context of the warranty period.
  • Before starting modifications, it is necessary to carry out a detailed diagnostic of the carto assess its technical condition.
  • Carefully check the condition of the engine,transmission and other key components.
  • Our service can only be performed if the vehicle is fully operational.
  • We use specialized service tools, tailored to the specific engine controller. This guaranteesfull compatibility and accuracy of readings.
  • This process is done in a controlled manner, ensuring the integrity of the data and enabling a secure comparative analysis betweenthe original and modified software.
  • Our programmers make precise changes to the engine parameter maps according to the requirements of the commissioned service.
  • The goal is to optimize these parameters to achieve fuel savings of min. 1.5 l/100km and to increase engine torque and power.
  • After modification, road tests are needed to check the car’s behavior.
  • It is important to monitor engine performance and response to various traffic situations.
  • Based on the results of the road tests, we can make a one-time final optimizationof the software.
  • The goal is to achieve an optimal balancebetween engine performance and safety.
  • It is important to maintain detailed documentation of all changes made to the software, which allows you to monitor eachstage of the process.
  • We provide a 6-month warranty for our services. It provides additional security andassurance in our services.

For the entire modification process, we use professional equipment from recognized brands. This allows us to safely and effectively make changes to the engine controller.

How much will it cost?

The prices below are net. Customer travel up to 150 km counting both ways is included in the price of modifications. For further distances, ask for an individual estimate!

For fleets of more than 5 cars it is possible to negotiate prices.

Euro 6 emission standard

PREMIUM Package

Set of software modifications

1200 €

Package 3.

  • reduction of combustion
  • power increase
  • failure modes

1100 €

Package 2.

  • reduction of combustion
  • power increase

900 €

Package 1.

  • disabling emergency modes(for diagnostic purposes only)

700 €

other cars

Standard Package

  • reduction of combustion, power increase

EURO 1 -5

800 €

other

Roller dynanometer

800 – 1200 zł

(The final price depends on the scope of work, which is determined on a case-by-case basis.)

PREMIUM Package

1200 €

Set of software modifications

Package 3.

1100 €

  • reduction of combustion
  • power increase
  • failure modes

Package 2.

900 €

  • reduction of combustion
  • power increase

Package 1.

700 €

  • disabling emergency modes(for diagnostic purposes only)

Standard Package

  • reduction of combustion, power increase

EURO 1 – 5 – 800 €

Roller dynanometer

(The final price depends on the scope of work, which is determined on a case-by-case basis.)

800 – 1200 zł

Contact

TechTIR Sp. z o.o.
43-200 Pszczyna
ul. Bielska 44

kom. +48 690 67 67 67
e-mail: biuro@techtir.pl

TechTir

About us

Offer

Privacy policy

Contact

Follow us

Ecology, Economy, Power!

With us you’ll be EcoPower!